Home
Sonnox Oxford EQ
The EQ plug-in is based on the OXF-R3 EQ section. It is a fully functional 5-band application with selectable shelf settings on LF and HF sections. Additionally, separate variable slope low pass and high pass filters are provided. The EQ also features 4 different selectable EQ types that cover most of the EQ styles currently popular amongst professional users, including some legacy styles which are renowned for their artistic capability. The use of novel coefficient generation and intelligent processing design provides unparalleled performance that surpasses analogue EQ in both sound quality and artistic freedom. This plug-in may well provide all the EQ you ever needed.
Control Ranges
| Section | Gain | Frequency | Q/Slope | Overshoot |
| LF Filter | 6dB/Oct steps | 20Hz - 400Hz | 0 –36dB/Oct | |
| LF Peak/Shelf | +/-20dB | 20Hz - 400Hz | 0.5 – 16 | 0 – 50% (Q adjust in Shelf) |
| LMF | +/-20dB | 30Hz - 600Hz | 0.5 – 16 | |
| MF | +/-20dB | 100Hz - 6KHz | 0.5 – 16 | |
| HMF | +/-20dB | 900Hz - 18KHz | 0.5 – 16 | |
| HF Peak/Shelf | +/-20dB | 2KHz - 20Khz | 0.5 – 16 | 0 – 50% (Q adjust in Shelf) |
| HF Filter | 6dB/Oct steps | 1KHz - 20KHz | 0 –36dB/Oct |
Dynamic Range & Distortion
| Total dynamic range | > 120dB* (RMS unweighted) | For any single section, including filters |
| Harmonic distortion | Undetectable | Using FFT analysis down to –160dBr |
| Control induced noise | < -95dBr (peak) | During adjustment of any single control |
Instantiations per DSP Chip
| Pro Tools | DSP TYPE | 48kHz | 96kHz | 192kHz | |||
| Mono | Stereo | Mono | Stereo | Mono | Stereo | ||
| 5 Band EQ & Filters | Mix | 2 | 1 | - | - | - | - |
| HD | 2 | 1 | 1 | - | - | - | |
| Accel | 6 | 3 | 3 | 1 | 1 | - | |
| 5 Band EQ | Mix | 4 | 2 | - | - | - | - |
| HD | 5 | 2 | 2 | 1 | 1 | - | |
| Accel | 12 | 6 | 6 | 6 | 2 | 1 | |
| 3 Band EQ | Mix | 6 | 3 | - | - | - | - |
| HD | 8 | 4 | 3 | 1 | 1 | - | |
| Accel | 18 | 9 | 8 | 4 | 4 | 2 | |
| Filters | Mix | 4 | 2 | - | - | - | - |
| HD | 5 | 2 | 2 | 1 | 1 | - | |
| Accel | 12 | 6 | 5 | 2 | 2 | 1 | |
|
PowerCore
|
44.1kHz
|
48kHz
|
96kHz
|
||||
|
Mono
|
Stereo
|
Mono
|
Stereo
|
Mono
|
Stereo
|
||
|
EQ
|
150mHz
|
6
|
3
|
5
|
3
|
2
|
1
|
|
Filters
|
150mHz
|
5
|
3
|
5
|
2
|
2
|
1
|
|
EQ + Filters
|
150mHz
|
3
|
1
|
3
|
1
|
1
|
1*
|
|
* Too large to fit in one chip; plugin is therefore split over two.
|
|||||||
Note: PowerCore plug-ins come together with Native licences too, so can be run on both PowerCore DSP and native host.
System Requirements
Pro Tools
Audio UnitsVSTPowerCore |