Home
Quested SB10R active 10" subwoofer
Specifications SB10R:
- Size (WxHxD): 24.3(w) x 13.1(h) x 11.4(d) inches
- Weight: 43.6 lb
- Drivers: 1 x 250mm (10")
- Input Sensitivity: Dependent upon controller setting
- Frequency response: Set by controller
- Input connector: 1 pair gold plated binding posts
- Input impedance: 3.3 Ω
Specifications SB10R Controller:
- Size: 1U case 10.6" deep
- Weight: 12.1 lb
- Input connector: 2x XLR + 1/4" combo jack
- Gain: -14dBu to +6 dBu
- Outputs:
- L & R Monitor Outputs: XLR
- Sub Bass Output: 1 pair binding posts
- Filters:
- L & R input summed to sub output
- Subsonic/High pass: -3dB @ 14 Hz, 24dB/oct or -3dB @ 28 Hz, 24dB/oct (set by internal jumper)
- Low Pass: -3dB @ 40 Hz to 135 Hz, externally adjustable @ 24db /oct or full range on CH A
- Left right input to left & right output
- Ultra sonic: -1dB @ 100k
- High pass: -3dB @ 40 Hz to 135 Hz, externally adjustable @ 24db /oct or full range on CH A
- Power amplifier:
- Output: > 210W RMS continuous
- T.H.D.: < 0.03% at levels up to 1dB below clip, 20 Hz - 120 Hz typ 0.005% @ 20W rms 100Hz
- Hum + Noise: < -100dB referred to clip
- Controls:
- Crossover frequency 40-135 Hz
- Test (band limited pink noise)
- Sub bass bypass
- Sub gain -14 to +6
- Sub phase
- Sub polarity
- Left channel sub filter bypass
- Subsonic filter, 14 or 28 Hz