ADAM subwoofers are dedicated to ADAM Audio’s primary goal: the best possible authenticity in the reproduction of music. For our subwoofers, this means combining power and precision while simultaneously avoiding “impressive” bass volume at the cost of accuracy. Their task is it to complement the highly acclaimed lucidity and transparency of the ADAM monitors in the lower and lowest frequencies.
Connectors and controls
All subwoofers up to the Sub2100 feature both balanced (XLR) and unbalanced (RCA) in and output connectors, and numerous controls to adapt the subwoofer to different room acoustics and specific requirements: All units have a level control that varies from -60dB to +6dB, a phase ±180° switch and variable upper frequency barrier control (50-150 Hz), a switchable 85Hz high pass filter for the satellite output. In addition, there is a ‘signal-on/continuous’ switch. This provides the option of automatic power up whenever the subwoofer receives a signal and automatic power off after 15 minutes of no signal.
The Sub10 Mk2 is a powerful subwoofer designed to extend the low frequency capabilities of any near or midfield monitoring.
A large (50 mm) voice coil is driven by a 200 W Ice Power amp. This amp stays cool as it uses PWM technology in the amp and the power supply sections, producing >90% overall efficiency, and can handle its maximum power without danger to the electronics or the driver.
The Sub10 Mk2 houses an excellent 10“ woofer, capable of a frequency response of 25 Hz - 150 Hz. The subwoofer works with a new down-firing bass reflex tube that, due to its shape and size, avoids unnecessary ventilation noise. For larger rooms or higher levels it is possible to chain as many ADAM Subs together as necessary.
The Sub10 Mk2 is an ideal match for ADAM monitors such as the SX-Series. In any small to medium sized control room, they guarantee powerful yet precise bass response.
- Quantity: 1
- Basket diameter: 10" (260 mm)
- Voice coil diameter: 2" (50 mm)
- Cone material: Paper
- Built-in Amplifiers
- Subwoofer: 1
- Amp. power RMS / music: 200 W / 300 W
- Control panel:
- EQ 80 Hz: -60 to +6 dB
- Input connectors:
- Analog: XLR / RCA
- General data:
- Panel: Rear
- Frequency response: 25 Hz - 150 Hz
- THD > 60 Hz: ≤1 %
- Max. peak: ≥113 dB
- Crossover frequencies: 50 - 150 Hz
- Input impedance: 10 KOhm
- Weight: 46.3 lb (21 kg)
- Height x Width x Depth: 22" (560 mm) x 12" (300 mm) x 15.5" (400 mm)
- Warranty: 5 Years (see DSPdoctors warranty)